Uniden UBC785XLT Specifications download pdf (Page 60)

You can hold any I-Call IDs. Because you can only hold on one ID, and there are two IDs

involved in any I-Call communication (the transmitting and the receiving units), you might not

hear the full conversation, but you probably will.

☞ In Search mode, when you hear an interesting I-Call, you can enter the instant

shortcut (decimal key) then RSM to enter I-Call Only mode. This blocks all

talkgroup traffic and lets you hear just the I-Call. To return to normal reception, you

must use the Menu system to select the ON or OFF option.

Note: When storing I-Call IDs, remember that the ID will be for only one of the units – either

the transmitting or receiving unit. Unless you specifically want to receive a certain ID,

it might be better to use the special code in the HINT below.

I-CALLS IN SCAN AND HOLD MODE

You can store I-Call IDs in Scan Lists, just like talkgroup IDs, for use by ID Scan and Scan

Hold modes. To program a specific I-Call Unit ID into a Scan Lists:

EDACS or Motorola Type 1

Press (decimal key) followed by the Unit ID digits, then E.

Motorola Type 2

Press 7 followed by the Unit ID digits, then E.

HINT - There is a special code to let you receive all I-Call IDs with a single Scan Lists

entry. Press (decimal key), 0, E. This will store the special code i0 in an

EDACS Scan Lists, or 700000 in a Motorola Scan Lists or Digital. Then,

whenever you Scan this entry, or select it in Hold mode, the scanner will receive

any active I-Calls, regardless of the Unit IDs.

Note: Motorola I-CALL tracking performance may vary between systems.

Multi-Track

The BC785D allows you to track more than one system at a time. Here are some highlights

of this feature:

❖ You can actually track up to 10 trunking systems at one time.

❖ You can trunk, scan, or search and scan conventional frequencies at the same time.

I-CALLs TALKGROUPS

OFF Not received Received normally This is the BC785D default

ON YES Received normally Use this choice to receive I-Calls

together with normal

talkgroup traffic.

3 ONLY YES NOT RECEIVED Use this setting to listen to I-Calls,

and block all talkgroup reception.

For quick access to this mode,

press (decimal) then RSM.

BC785D 11/8/2 1:01 PM Page 56

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 99 100

No comments

Uniden UBC785XLT Specifications Page 60