Uniden DCX730 - DCX 730 Cordless Extension Handset Specifications download pdf (Page 45)

Common Issues

If your phone is not performing to your expectations, please try these simple steps rst. If these steps do not solve

your problem, please call our Customer Hotline (see back cover for contact information).

Symptom Suggestion

The charge LED fails to light

when the handset is placed in

the cradle.

Make sure the AC adapter is plugged into the base or the charger (if you

have more than one handset) and wall outlet.

Make sure the handset is properly seated in the cradle.

Make sure the charging contacts on the handset are clean.

•

The audio sounds weak. Move the handset and/or base away from metal objects or appliances and

try again.

Make sure you are not too far from the base.

•

Can’t make or receive calls. Make sure you are not too far from the base.

Make sure the line is not in use. If an outside call is already using a line,

you cannot use that line to make another outside call.

Check both ends of the base telephone line cord.

Make sure the AC adapter is plugged into the base and wall outlet.

Disconnect the AC adapter and reconnect.

Change the Digital Security Code (see page 4

4).

•

The handset doesn’t ring or

receive a page.

Make sure that you are not too far from the base.

Charge the battery in the handset for 15 to 20 hours by placing the handset

on the base or charging cradle.

Change the Digital Security Code (see page 4

4).

•

Severe noise interference. Keep the handset away from microwave ovens, computers, remote control

toys, wireless microphones, alarm systems, intercoms, room monitors, u-

orescent lights, and electrical appliances.

Move to another location or turn off the source of interference.

•

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 55 56

No comments

Uniden DCX730 - DCX 730 Cordless Extension Handset Specifications Page 45