Uniden DXI8560 Series User Manual download pdf (Page 9)

Sheet 9

Enter the code number (up to twenty digits) into the phonebook (See section 6-1 on Entering a New Number

into the Phonebook). Be sure to enter the code number into the phonebook exactly as you would enter it

during a call.

During a call, when you hear the prompt that tells you to enter the code number, press [ /memory] to

open the phonebook.

Find the phonebook entry number you want to use (See section 6-2 on Finding Phonebook Entries).

Press [select/channel]. The phone sends the digits of the code number exactly as you saved them in the

phonebook entry.

7) Mounting the Base on a Wall

You can mount the phone on any standard telephone jack wall plate.

Route the AC adapter and the telephone

cords through the hole of the wall

mount bracket.

Connect the AC adapter and the

telephone cords as shown.

Remember to route the AC adapter

cord through the channel.

Line up the four tabs on the wall mount bracket (two at the top and

two at the bottom) with the four notches on the bottom of the base.

Slide the bracket into place.

Place the mounting slots over the pins on the wall plate.

Slide the base down to lock it into place.

Hook the AC adapter cord

into the smaller notch at

the bottom of the bracket,

and let the cord hang

below the bracket.

Plug the telephone cord

into the wall jack.

Hook both sides of the

telephone cord into the

larger notch

tuck the excess cord into the

open space in the bracket.

Wall plate

To AC outlet

AC adapter (supplied)

To telephone

wall jack

Telephone cord (supplied)

Route the AC adapter and the telephone

cords through the hole of the wall

mount bracket.

Connect the AC adapter and the

telephone cords as shown.

Remember to route the AC adapter

cord through the channel.

Line up the four tabs on the wall mount bracket (two at the top and

two at the bottom) with the four notches on the bottom of the base.

Slide the bracket into place.

Place the mounting slots over the pins on the wall plate.

Slide the base down to lock it into place.

Hook the AC adapter cord

into the smaller notch at

the bottom of the bracket,

and let the cord hang

below the bracket.

Plug the telephone cord

into the wall jack.

Hook both sides of the

telephone cord into the

larger notch

tuck the excess cord into the

open space in the bracket.

Wall plate

To AC outlet

AC adapter (supplied)

To telephone

wall jack

Telephone cord (supplied)

Note: To mount the phone directly on the wall, insert two 1

inch, #10 screws (not supplied) into the wall

using anchors suitable for the wall material. Place the screws 3

inches apart, and allow

inch free

space between the wall and screw heads.

To remove the wall-mount bracket

At the bottom of the base, lift up on the release latch and

push the bracket up.

Release latchRelease latch

8) Troubleshooting and Maintenance

8-1. Solving Common Issues

If your phone is not performing to your expectations, please try these simple steps rst. If these steps do not

solve your problem, please call our Customer Hotline. See back cover page for contact information.

When you have this problem…

Try…

The /in use LED or LED won't

turn on when the handset is placed

in the cradle.

Checking the AC adapter connection.

Re-seating the handset in the cradle.

Cleaning the charging contacts on the handsets (See section 8-8).

•

The audio sounds weak and/or

scratchy.

Moving the handset closer to the base.

Moving the handset and/or base away from metal objects or

appliances and try again.

Changing the channel by pressing [select/channel] during a call.

This can help eliminate background noise.

•

No handsets can make or receive

calls.

Checking the telephone cord connection.

Disconnecting the AC adapter. Wait a few minutes, then reconnect it.

Asking your telephone company if they use pulse dialing (See section

3-1).

•

A single handset can’t make or

receive calls.

Charging the battery for 15-20 hours.

Moving the handset closer to the base.

Changing the handset-to-base code (See section 8-3).

•

A handset can make calls, but it

doesn’t ring.

Making sure the ringer isn’t turned o (see section 3-2).•

A handset’s display doesn’t show

anything.

Charging the battery for 15-20 hours.

Checking the battery pack connection.

•

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Uniden DXI8560 Series User Manual Page 9

Comments to this Manuals

Related products and manuals for Telephones Uniden DXI8560 Series