Uniden EXI7926 Specifications download pdf (Page 12)

Step 3

(continued)

Battery use time (per charge)

From fully charged.

• Seven hours continuous use.

• Fourteen days when the handset is in the standby mode.

When the battery charge becomes low

When the battery pack is very low and needs to be

charged, the phone is programmed to eliminate

functions in order to save power. If the phone is not

in use, "

Low Battery" flashes in the display and

none of the keys will operate. If the phone is in use, "

Low Battery" flashes and

the handset beeps. Complete your conversation as quickly as possible and return the

handset to the base unit for charging.

Low Battery

Notes

• Even when the battery pack is not being used, it will gradually discharge over a long

period. For optimum performance, be sure to return the handset to the base unit

after a telephone call for charging the battery.

• The built-in memory backup can hold numbers and names stored in the memory for

up to 2 minutes, while you replace the battery pack.

• If you must replace the battery pack during a telephone call, complete the

replacement of the battery pack within 30 seconds, and you can return to the

original call.

• Rechargeable batteries have a memory effect that reduces standby and talk time.

To avoid this memory effect, on a monthly basis, use the phone until the

Low Battery"

indication appears. Then charge the battery for 12-15 hours.

Cleaning the battery contacts

To maintain a good charge, it is important to clean all battery contacts on the handset

and base unit about once a month. Use a pencil eraser or other contact cleaner.

Do not use any liquids or solvents.

EXI 7926 H1 99.8.23 11:31 AM Page 12

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 45 46

No comments

Uniden EXI7926 Specifications Page 12