Uniden EXI976C - EXI 976C Cordless Phone Owner's Manual download pdf (Page 28)

Using the System While You’re Away from Home

You can also operate your answering system from any touch-tone phone. Before you

can use this feature, you have to program a security code.

Programming a Security Code

With the phone in standby, open the menu. Select Answering Setup, then select

Security Code. Use the number keypad to enter a two-digit security code (01 to 99).

Press MENU/OK when you’re finished.

# Remember to make a note of your new security code!

Dialing in to Your System

1. Call your telephone number and wait for the system to answer.

- If you have the Ring Time set to Toll Saver, the system answers after 2 rings if you

have new messages and 4 rings if you don’t. You can hang up during the third ring.

- If your answering system is off, it will answer after about 15 rings and sound a

series of beeps instead of your greeting.

2. During the greeting (or beeps), press # and immediately enter your security code. (If

you enter it incorrectly 3 times, the system hangs up and returns to standby.)

3. The system announces the time, the number of messages in memory, and a

help prompt. It beeps

intermittently to let you

know it’s waiting for a

command.

4. When you hear beeping,

enter a 2-digit command

from the chart:

# If you don’t press any keys for 15 seconds, the phone will hang up and return to

standby.

#1 Repeat message

#2 Play message

#3 Skip message

#4 Delete message

#5 Stop playback

#6 Turn the system on

#9 Turn the system off

#0 Hear help prompts

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 34 35 36

No comments

Uniden EXI976C - EXI 976C Cordless Phone Owner's Manual Page 28