Uniden XCA4500 Specifications download pdf (Page 9)

Installation

Selecting a Location

Before choosing a location for your

XCA4500

, there are some important

guidelines you should consider:

• The location should be close to both a phone jack and continuous

power outlet. (A continuous power outlet is an AC outlet which does

not have a switch to interrupt its power.)

• Keep the Base Unit and Handset away from sources of electrical

noise such as motors or fluorescent lighting.

• Be sure there is sufficient space to fully extend the Base Unit

antenna.

• The Base Unit can be placed on a desk or tabletop or mounted on a

standard AT&T or GTE wall plate.

• If you decide to mount your integrated telephone answering device

on the wall, make sure to change the handset retainer so that the

tab which holds the Handset faces up. (See page 20 for more

information.)

• You should charge your new phone for 15-20 hours before

completing the installation or using the Handset.

Telephone Line Outlets

There are two types of phone outlets:

Modular Jack

Most phone equipment available now uses modular jacks. Phone

cords are fitted with a molded plastic connector which plugs into

this type of jack. If you do not have modular phone jacks, contact

your local telephone company for information about their

installation.

Hard-wired Jack

Some equipment is wired directly to a phone jack, and these types

of installations require a modular jack converter. This type of

installation is not difficult; however, you should contact your Uniden

telephone dealer or a telephone supply store for advice about the

proper adapter or converter for your particular situation.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 89 90

No comments

Uniden XCA4500 Specifications Page 9