Uniden ATLANTIS 200 Owner's Manual download pdf (Page 17)

NOTE

• Scanning starts from the lowest to highest channel and

stops when it finds an active channel. It remains on

that channel until the transmission ends, then resumes

scanning after a 2 second delay period.

• When in the scan mode, the unit automatically activates

the Triple Watch feature. To deactivate Triple Watch

from the scanning mode, press and hold

16/9/TRI

for 2

seconds.

TRIPLE

disappears from the display.

Transmit

1. Transmission power can be set to 3.5W or

1W. Press

PWR h/l-loCk

to make the

change. The

HIGH

indicator on the

displays accordingly.

2. To transmit, press and hold

PTT

(push-to-talk).

appears on the

display.

3. To return to receive, release

PTT

disappears.

NOTE

• If you press

PTT

for more than 3 minutes,

starts

blinking and the transmission ends. The TX time out tone

sounds when you release

PTT

• If the battery indicator Level 0 is flashing when you press

PTT

, the radio will not transmit and the

icon flashes.

(see page 6)

Lighted Keys and Display

To light the display, press any key except

PTT

NOTE

If you press any key except

PTT

while the display and keypad are

illuminated, they remain illuminated for 10 seconds.

HIGH

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 32 33

Comments to this Manuals

No comments

Uniden ATLANTIS 200 Owner's Manual Page 17

Comments to this Manuals

Related products and manuals for Two-way radios Uniden ATLANTIS 200