Uniden BC 245XLT User Manual download pdf (Page 39)

Setting the Squelch

Since Squelch is automatically adjusted in trunking mode,

it isn’t necessary to manually adjust the squelch control

while trunk tracking. However, the squelch setting you

select before you begin trunk tracking can affect how fast

your scanner acquires the data channel, and, in some

instances, the squelch setting can prevent your scanner

from acquiring the data channel at all.

Set SQUELCH in this

position before

selecting a

trunking bank.

Note: You can

change this

recommended setting,

if necessary, to

provide better

performance in

your area.

Programming Trunking Frequencies

Before you start programming your scanner to track a

trunked system, consider the following:

You can only program one trunking system in each

bank of your scanner.

Trunking frequencies must be entered while in the

Trunking Programming mode.

If you’re in the Trunking Programming mode, you

cannot select channels in other banks.

For example, if you are programming Bank 4, you

can only select channels 91-120 with the

or keys.

IMPORTANT: If you are programming an EDACS

trunked system, you must enter the frequencies in

a specific order. Check the frequency guide

included with the radio and the listed web sites

for details.

C:\Manuals\BC245 VA\BC245 VA rev.vp

Fri Nov 12 10:32:08 1999

Color profile: Disabled

Composite Default screen

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 89 90

No comments

Uniden BC 245XLT User Manual Page 39