OCEANUS DSC/ATIS_ENG_0512 5/12/05 10:34 AM Page i
8InstallationCaution: The OCEANUS DSC/ATIS will only operate with a nominal12 volt negative ground battery system.It is important to carefully determi
9Engine Noise SuppressionInterference from the noise generated by the electrical systems ofengines is sometimes a problem with radios. The OCEANUS DS
10Installing the OCEANUS DSC/ATISAfter you have carefully considered the various factors affecting yourchoice of location, position the radio (with th
11POWER On/OffTurn the unit On by rotating the PWR/VOLcontrol clockwise. Adjust the volume to a comfortable level.When you turn the unit On, you will
12Turn SQUELCH fully clockwise. This raises the “Squelch Gate” so highthat only very strong signals can get through.Turn SQUELCH fully counterclockwi
13TRIPLE WATCHTriple Watch monitors Channel 16, Channel 9, and the current MarineChannel or Weather Channel.To activate Triple Watch, press and hold 1
14To cancel the channel in Memory, press MEM.Triple Watch ScanTo turn Triple Watch Scan On, press and hold STEP/SCAN for 2seconds. While the current
15TRANSMITTINGNote: Channel 70 is DSC only. All the available marine channel arelocated on page 49.SETTING TX OUTPUT Caution: It is important to reme
16DISTRESSNote: You must set the user MMSI in orderto send a Distress call. Please seepage 42 to set the MMSI.This feature will allow you to transmi
17MARINE DISTRESS PROCEDURESpeak slowly – clearly – calmly.1. Make sure your radio is On.2. Tune to Channel 16.3. Press the PTT button on the micropho
Included with your OCEANUS DSC/ATIS ...3Controls and Indicators...
181. DIGITAL SELECTIVE CALLING (DSC)Digital Selective Calling is a process of establishing a radio call, it hasbeen chosen by the International Mariti
193. Select the individual you want to contactusing CH ▲ and ▼. Press SELECT totransmit the individual DSC signal.4.WAITING appears followed by theind
203. Press SELECT. The MMSI codeappears, and you can now call thegroup members. Press SELECT to call.When you finish calling, the radioreturns to the
211-D. POSITION REQUESTThis radio has the ability to request the position of an individual vesselthat is registered in the DIRECTORY.1. Press SELECT a
223. Press SELECT. The individual directoryappears.4. Select the name to request theindividual’s position using CH ▲ and ▼.5. Press SELECT to transmit
232. Display POS SEND using CH ▲ andCH ▼.3. Press SELECT. The individual directoryappears.4. Press SELECT to send your positioninformation.1-E. POSITI
241-F. STANDBYThe DSC STANDBY function allows the OCEANUS DSC/ATIS toanswer DSC calls with the UNATTENDED message and record the callsfor response at
252. Display CALL WAIT using CH ▲ and CH ▼.3. Press SELECT. The CALL WAITdirectory appears.4. Select the options you want to viewusing CH ▲ and ▼.1. P
265. Press SELECT.6. If a DISTRESS call is received in CallWait, the following display appears.If an INDIVIDUAL call is received in CallWait, the foll
271. Press MENU to enter Menu Operation.2. Press CH ▼ once to display SETUP,and press SELECT.SETUP has some options as follows. To exit,select EXIT.2-
Setup ...27Alarm Clock...
286. Select AM or PM using CH ▲ or ▼, thenpress SELECT.7. A confirmation screen appears.2-A-2. ALARM ONThis feature allows you to turn the alarm ON.1.
292-A-3. ALARM OFFThis feature allows you to turn the alarm OFF.1. Press SELECT at SETUP (To enterSETUP, see page 27).2.ALARM CLOCK appears.3. Press S
302-B. LOCAL TIME ADJUSTThis feature allows you to fine tune the Local Time for any location inEurope. The feature enables you to adjust the Local tim
312-C. DAYLIGHT SAVINGS On/OffThis feature enables you to select the automatic Daylight Savings clocksetting.To set DAYLIGHT SAVINGS On/Off1. Press SE
322-D. DIRECTORYThis function will allow you to send an individual call, etc. The Directoryfunction memorizes the name and MMSI number of 20 other ve
332-D-1. NEWThis function will allow you to enter new information into thedirectory.1. Press SELECT at NEW. The registeringscreen appears.2. You can n
341. Press SELECT at the individual youwant to edit.2.EDIT appears, then press SELECT.3. You can now edit the person’s name.Using the number key pad o
352-D-3. DELETEIf you want to delete the directory1. Press SELECT at the individual youwant to delete.2. Press CH ▼ once. DELETE appears,then press SE
362-E. AUTO CHANNEL SWITCH This feature is to allow you to disable the automatic channel change thathappens when receiving a DSC call. This feature i
372-F. POSITION REPLYWhen the calling radio has requested the position information of yourradio, you can decide to transmit an acknowledgment automati
2The Uniden OCEANUS DSC/ATIS VHF marine radio has beendesigned to give you a rugged, reliable instrument that will provide youwith years of trouble-fr
38Example: OnWhen the radio receives a positionrequest, the following screen appears.Example: OFWhen the radio receives a positionrequest, the followi
392-G. CH TAGThis feature allows you to name each marine channel.1. Press SELECT at SETUP (To enterSETUP, see page 27).2. Display CH TAG using CH ▲and
403. Press and hold SELECT when you enterthe last digit.1. Press SELECT at the individual channelyou want to edit.2. You can edit the name. Using then
412-H. GROUP MMSI1. Press SELECT at SETUP (To enterSETUP, see page 27).2. Display GROUP MMSI using CH ▲and ▼.3. Press SELECT. The group MMSI IDscreen
422-I. USER MMSIMMSI’s are issued most of the time by National TelecommunicationOrganisations. You will need to obtain a nine digit MMSI number andpro
435. After the final digit is entered, press andhold SELECT. The radio returns toUSER MMSI screen.Note: You can only program your radioonce with an MM
443. SYSTEM1. Press MENU to enter Menu Operation.2. Press CH ▼ twice to display SYSTEM,and press SELECT.SYSTEM has 3 options as follows. To exit,selec
453-B. LAMP ADJUST1. Press SELECT at SYSTEM.(To enter SYSTEM, see page 44.)2. Press CH ▼ once to select LAMPADJUST.3. Press SELECT to enter the settin
463-C. KEY BEEP1. Press SELECT at SYSTEM.(To enter SYSTEM, see page 44.)2. Press CH ▼ twice to select KEY BEEP.3. Press SELECT to enter the settingmod
47Switching the Inland Waterway Mode/Seagoing ModeYou can switch between Inland Waterway mode and Seagoing mode.Press and hold PA/MODE to switch betwe
3Included with your OCEANUS DSC/ATISOCEANUS DSC/ATISOwner’s ManualOCEANUS DSC/ATIS RadioMicrophone Hangerand ScrewsMounting Bracketand KnobsDC CordSpa
48• Flush mounting bracket for “in dash” installation.(Black = FMB322B)• Speaker/Microphone (HHVAT07).Contact your Dealer for information.Optional Acc
49VHF FM Marine Radio TelephoneChannel and Functions(International Channels)CHANNEL FREQUENCY (MHz) TYPE OF SHIP SHIP CHDESIG TRANSMIT RECEIVE TRAF
50GeneralControls : On-Off/Volume, SquelchStatus Indicators : TX (Transmit), TRI (Triple Watch), HI (High), LO (Low), U, C, I, MEM, WX, DSC, (Alarm),
51If the OCEANUS DSC/ATIS does not perform to your expectations, trythe suggestions listed below. If you cannot get satisfactory resultscontact your
52Your OCEANUS DSC/ATIS is a precision of electronic equipment andyou should treat it accordingly. Due to the rugged design, very littlemaintenance is
53OCEANUS DSC/ATIS_ENG_0512 5/12/05 10:34 AM Page 53
OCEANUS DSC/ATIS_ENG_0512 5/12/05 10:34 AM Page b
4Front panel/Microphone1. PTT Switch - Press to transmit and release to receive.2.5.CHANNEL/▲/▼- These keys are used to change the channel numberup/do
5Rear Panel Connectors23411. DC Jack2. ACC Connector3. Remote Connector4. Antenna ConnectorTo OCEANUS DSC/ATISNote: DC13.8V and GND are for GPS ANT.AC
61. TX (Transmit) - Indicates transmitting.2.HI (High) - Indicates transmit output is 25 Watts.3.DSC - Indicators the radio is in the DSC mode.4.TRI (
7NOTES: "POS SEND", "LOCAL TIME ADJUST", "DAYLITE SAVE", and "ALARM CLOCK"are not displayed in Menu when GPS m
Comments to this Manuals