Uniden G455 User's Guide download pdf (Page 7)

WHAT THE LIGHTS MEAN

  

Power

status

(Red)

The camera is on.

Off The camera is off.

Link

status

Flashing The camera is in pairing mode.

(Green)

The camera is connected to the monitor.

Off The camera is in standby.

SETTING UP THE EQUIPMENT

SET UP THE MONITOR

1. If you are using the monitor as a stand-alone unit, flip out the stand on the back of the monitor,

and extend the antenna. Connect an AC adapter to the power input on the side of the monitor.

If you are using the monitor in the cradle, insert the monitor into the cradle and connect an AC

adapter to the input on the back of the cradle.

2. Connect the other end of the adapter to a 120 volt AC (standard indoor) power outlet.

3. Press and hold the

POWER

button on the top of the monitor for 3 - 4 seconds to power it up.

4. The monitor displays the Uniden

Welcome

screen for a few seconds and then transitions to the

LIVE view.

The screen remains dark until the cameras are powered up.

MOUNT THE CAMERA STAND

GENERAL GUIDELINES

The Uniden Guardian GC45 cameras included with your monitor are weatherproof and have an

IP66 rating. Water can be sprayed on them and they will still work; however, the cameras cannot be

submerged.

1 2 3 4 5 6 7 8 9 10 11 12 ... 63 64

No comments

Uniden G455 User's Guide Page 7