Uniden UWS 1101 Owner's Manual download pdf (Page 6)

Getting Started

Connect the Power

Connect one AC adapter to the camera’s power input and the other to the receiver’s power 1.

input. (The two adapters are exactly the same.)

Connect the other end of each adapter to a standard 240V AC indoor outlet. 2.

Press the 3.

POWER

button on both the receiver and the camera; the bottom light on the left (the

Power status

light) should turn on.

If... Try...

Power status

light

doesn’t come on

reconnecting the AC adapter -

seeing if the power outlet is controlled by a wall switch -

Charge the batteries

The batteries in your camera and receiver will charge whenever the power is connected. Let the

batteries charge completely (about 8 hours) before you unplug the camera and receiver to move

them around. (You can still use the camera and receiver: just keep them plugged in.)

LINK

POWER

button

POWER

button

UWS 1101 OM-Hardware 6 28/9/11 10:00:10 AM

1 2 3 4 5 6 7 8 9 10 11 ... 27 28

No comments

Uniden UWS 1101 Owner's Manual Page 6