Uniden D3580 User Manual download pdf (Page 25)

English - 25

Bluetooth problems Possible solutions

The D3580 paired with

my phone, but I can’t hear

anything through the

handset.

x Adjusting the handset volume.

x Setting your cellular phone to transfer the audio to

a Bluetooth device. Check your phone’s manual for

instructions on Bluetooth setup and options.

x Erase the Bluetooth pairing and repair the cellular

phone to the base. To erase the Bluetooth pairing,

see page 12.

Installing a Line Filter or DSL Filter

A telephone line filter or DSL filter prevents services that use the phone line from

causing interference on your phone. To get a line filter, contact your service provider

or look in an electronics store.

Plug the filter into the telephone wall jack and plug the base into the filter. Make a

test call to make sure the noise is gone.

Liquid Damage

CAUTION: If the base is covered in liquid, disconnect the adapter & phone

cord from the wall before touching it.

If the liquid is only on the exterior housing of the base or handset, wipe it off and

use as normal. If you can hear liquid inside the housing:

1. Remove all compartment covers, and disconnect all cables and cords.

2. If liquid is leaking from any vent or hole, turn the phone so that vent faces down.

If not, place the largest vent face down.

3. Let dry for at least 3 days. Check for liquid inside the phone before replacing

compartment covers & reconnecting cords.

Resetting Handsets

If you have trouble with a handset or if you want to replace one, clear the

registration information from the base and the handset:

1. Press & hold

end

and

at the same time until you see the

System Reset

menu.

2. If you still have the base the handset is registered to, select

Deregister HS

, then

select the handset you want to reset. If you don’t have that base anymore, select

Base Unavailable

3. To confirm, select

Yes

. The handset displays

Handset not registered

Registering Handsets

If you see a “not registered” message on a handset, you must register it to a base

before using it.

1. Place the handset in the base; the display should say

Handset Registering

1 2 ... 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments

Uniden D3580 User Manual Page 25

Comments to this Manuals

Related products and manuals for Handset Cordless Phone Uniden D3580