Uniden DCX 770 User Manual download pdf (Page 9)

– 9 –

Installing a Replacement Battery

Follow the steps if you need to replace a battery.

1

Press down on the handset battery

case cover (use the finger indention

for a better grip) and slide the cover

downward to remove.

2

Remove the existing battery and

unplug the connector from the jack.

3

Plug the battery pack connector

(red, black, and white wires) into the

jack inside the battery compartment.

(The connector notches fit into the

grooves of the jack only one-way.)

Match the wire colors to the polarity

label in the battery compartment, and

push the connector in until you hear a

click.

4

Make sure you have a good connection

by slightly pulling on the battery

wires. If the connection is secure, the

battery jack will remain in place.

5

Place the battery case cover back on

the handset by sliding it upwards

until it clicks into place.

• Use only the Uniden battery

(BT-0001) supplied with your phone.

Replacement batteries are available

through the Uniden Parts Department. (See

page 2.)

•Don't place the charger in direct sunlight

or subject it to high temperatures. The

battery may not charge properly.

Rechargeable Lithium Ion Batteries

Must Be Recycled or Disposed of Properly

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments