Uniden EXS 2010 User Manual download pdf (Page 10)

Direct wall plate mounting

If you don't have a standard wall plate, you can mount your phone

directly to the wall. Before doing this, consider the following:

• Avoid electrical cables, pipes, or other items behind the mounting

location, that could cause a hazard when inserting screws into

the wall.

• Try to mount your phone within 10 - 15 feet of a working phone

jack to avoid excessive cord lengths.

• Make sure the wall material is capable of supporting the weight of

the base and handset.

• Use #10 screws (minimum length of 1-3/8 inches) with anchoring

devices suitable for the wall material where the base unit will be

placed.

1 Insert two mounting screws

into the wall, (with their

appropriate anchoring device),

3-15/16 inches apart. Allow

about 3/16 of an inch between

the wall and screwheads for

mounting the phone.

2 Refer to steps 1 through 9 on

page 7 and 8 to mount the

telephone.

TOP

3/16 in.

3-15/16 in.

8 On the base unit, pull the

handset retainer out of the slot.

Rotate it clockwise

180 degrees.

9 Flip the retainer from front to

back. Slide it back into the slot

so that the lip of the retainer is

up and the oval is down. The

retainer holds the handset

in place.

DIGITAL

900MHz

Handset retainer

If the handset beltclip is

attached, you cannot

charge the handset facing

forward when the phone is

mounted on the wall (See

page 20).

EXS 2010 6/28/00 4:12 PM Page 12

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

Comments to this Manuals

No comments

Uniden EXS 2010 User Manual Page 10

Comments to this Manuals

Related products and manuals for Phones Uniden EXS 2010