Uniden PS-0035 User Manual Page 21

  • Download
  • Add to my manuals
  • Print
  • Page
    / 28
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 20
19
If… Try…
The voice message
icon won't go away.
Resetting the Voice Message Waiting Indicator (see
page 17).
-
I can't register a
handset.
Seeing if you already have 6 handsets registered to
this base.
Resetting the handset.
-
-
Weak or Hard To Hear Audio
If a caller’s voice sounds weak or soft, the signal might be blocked by
large metal objects or walls; you might also be too far from the base, or the
handset’s battery may be weak.
Try moving around while you’re on a call or moving closer to the base
to see if the sound gets louder.
Make sure the handset’s battery is fully charged.
Try adjusting the volume of the earpiece or the audio tone (see below).
Adjust the audio tone
During a call, press
TONE
to cycle through the three audio tone options:
High Tone
,
Natural Tone
(recommended for hearing aid users), or
Low
Tone
. (The tone setting appears in the display as you do this.) You may
have to experiment to figure out which audio tone works best for you.
Noise or Static On The Lineoise or Static On The Line
The most common cause of
noise or static on a cordless
phone is interference. Here are
some common household
sources of interference:
electrical appliances,
especially microwave ovens
computer equipment,
especially wireless LAN
equipment and DSL modems
radio-based wireless
devices, such as room
monitors, wireless
controllers, or wireless headphones or speakers
large florescent light fixtures (especially if they give off a buzzing noise)
Do you have a T-Coil hearing aid?
If you have a hearing aid equipped with
a telecoil (T-coil) feature, the interaction
between the hearing aid and digital
cordless phones can cause noise in the
handset. If you have a T-coil hearing
aid and you have problems with noise
on the line, try turning on
T-coil
mode.
Open the menu. Select
Handset Setup,
then select
T-coil
.
Using T-coil mode can shorten
the handset's talk time; make
sure to watch your battery status
and keep the battery charged.
Do you have a T-Coil hearing aid?
If you have a hearing aid equipped with
a telecoil (T-coil) feature, the interaction
between the hearing aid and digital
cordless phones can cause noise in the
handset. If you have a T-coil hearing
aid and you have problems with noise
on the line, try turning on
T-coil
mode.
Open the menu. Select
Handset Setup,
then select
T-coil
.
Using T-coil mode can shorten
the handset's talk time; make
sure to watch your battery status
and keep the battery charged.
Page view 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments