Uniden WNR2004 Technical Information download pdf (Page 40)

RESTORING FACTORY DEFAULTS WITH THE HARDWARE

If you cannot access the configuration screens, you will need to

reset the factory defaults through the hardware. Use a pencil or

pin to press the reset button at the rear of the router. Hold the

reset button in for 10 seconds, then release it.

After you reset the router to its factory default configuration, you

must login to the router using the factory default IP address and

password. (See Logging In on page 22.)

SYSTEM LOGS

The system logs track access to the router, communication with

the ISP, and errors. The system log is most useful for

troubleshooting the router.

AUTOMATICALLY EMAILING SYSTEM LOGS

You can configure the router to email a copy of its system log to a

computer automatically.

1. Open a browser window and login to the router.

2. In the menu at the left side of the screen, click System

Administration, then Log/Report, then Email. This opens

the Email Logs screen (see Figure 35).

Figure 35 Email Logs Screen

3. In the Email field, select Enable.

4. In the Mail Server field, enter the name of the mail server

the router should send the log to. The mail server name will

usually have the following format:

mail.uniden.com

5. In the Mail To field, enter name of the user or email account

the router should send the log to.

6. If this account requires authentication to receive external

email, click Mail Server Authentication, then enter the

User Name and Password.

7. If you select the Daily log, select what time the router should

send the log each day.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 57 58

No comments

Uniden WNR2004 Technical Information Page 40