Uniden SC200 User Manual download pdf (Page 33)

Note: Subaudible tone search mode will be locked out for

channels that have been previously programmed for

subaudible tone. To perform a new subaudible tone search for

a previously programmed channel, re-program the frequency

for the channel first, and then enter subaudible tone search

mode. This is intended to prevent inadvertent reprogramming

of previously programmed channels.

Using Tone Search

1. Press .

2. To determine if a stored frequency has an associated

CTCSS tone or CDCSS tone, press when your

scanner stops on a channel.

3. Press and hold until you hear two short beeps.

CTCSS

and

CDCSS

display and begin flashing, and the

scanner starts searching for an associated CTCSS and

CDCSS tone. All tones are checked if the transmission is

long enough. If there is a break before a tone is

identified, then your scanner starts searching where it

left off when the transmission begins again.

Note: If a CTCSS or CDCSS tone has been stored in a

channel, then tone search is not available.

C:...UC303ZL(SC200).VP

Mon Mar 18 17:34:39 2002

Color profile: Disabled

Composite Default screen

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 55 56

No comments

Uniden SC200 User Manual Page 33