Uniden DXI986-2 Owner's Manual download pdf (Page 10)

GETTING STARTED[ 10 ] www.uniden.com

B. Install the rechargeable battery packs into both

handsets

Both handsets are powered by a rechargeable battery packs.

The battery recharges automatically when the handset is

placed in the main base unit or charging cradle.

Charge the handset battery pack for at least 15-20

hours before using your new cordless telephone for the

first time! To maximize the charge capacity of your battery

pack, DO NOT plug the telephone cord into the main base

unit and wall jack until the battery is fully charged.

1) Press down on the handset battery case cover (use the

finger indention for a better grip) and slide the cover

downward to remove.

2) Plug the battery pack connector (red & black wires) into

the jack inside the battery compartment.

(The connector notches fit into the grooves of the jack only

one-way.) Match the wire colors to the polarity label in the

battery compartment, connect the battery, and listen for

a click to insure connection.

3) Make sure you have a good connection by slightly pulling

on the battery wires. If the connection is secure, the

battery jack will remain in place.

Use only the Uniden

(BT-905) rechargeable

battery packs supplied

with your cordless

telephones.

UC427ZH (DXI986-2) 10/20/03 10:52 AM Page 10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 51 52

No comments

Uniden DXI986-2 Owner's Manual Page 10