Cordless TelephoneEXAI 7980Owner's ManualThank you for your purchase of the Uniden EXAI 7980 cordlesstelephone. Please read this Owner's Man
10Step 3 (continued)Battery use time (per charge)From fully charged• Seven hours coutinuous use.• Seven days when the handset is in the standby mode.W
11Step 4Setting Caller ID optionsThere are three Caller ID options, Auto Talk, CIDCW (Caller ID with Call Waiting), andArea Code.1 In the standby mode
12Step 4 (continued)Entering your area codeWhen you use this phone for the first time, or move to an area that has a different areacode, you must ente
13Making callsDialing from standby1Dial the phone number. (up to 32 digits.) Example: Enter 817-858-33002 Press . “Talk” flashes on thedisp
14Making calls (continued)Dialing from talk mode1Pick up the handset.2 Press . “Talk” and the volumesetting appear on the display.3 Dial the
15Making calls (continued)RedialingThe redial key redials the last number dialed. The redialed number can be up to 32 digitslong.Redialing from standb
16Receiving calls1Phone rings.2 Press . “Talk” and thevolume setting appear on the display.3 To hang up, press or place thehandset on
17Handset ringer toneIn the standby mode, press or . Each time or is pressed, the ringer tone setting ch
18Base ringer switchTo turn off the ringer, set the ringer switch to the off position. This switch turns the baseringer on or off.Base speaker volumeT
19Memory storing You can store up to 10 phone numbers in the dial memory.Storing phone numbers and names1Press and hold until a tonesounds and “
2IntroductionThank you for choosing the Uniden EXAI 7980 cordless telephone. This phone is designed to exacting standards that provide reliability, lo
204 Use the , , , , or keys to enter the name. The name cannot exceed 16 characters.• Use t
21Memory dialing Making calls with memory dialingDialing from standby1 Press .The handset displays your programmed memory locations.2Press
221 Press ."Talk" and the volume settingappear on the display.2 Press .3 Press the number keypad to selectthe memory loc
23Memory editing Editing a stored name and/or phone number 1Press and hold until a tonesounds and “Memory Store” is displayed.2Press the
24Memory editing (continued)7 Use the number keypad, , , , or key to edit the phone number. T
254 Press to move the pointer down to “Delete Memory” .5 Press . The following confirmation screen appears.6 Press t
26Using the Page FeatureTo locate the handset (while it’s off the base)1 Press on the base. 2 The handset beeps for 60 seconds.
27Caller ID FeaturesWhen the telephone rings1When phone rings, the status LED blinks.On the second ring, the display shows the caller’s phone number,
28Caller ID (continued)Viewing the Caller ID Message listThe Caller ID list stores information for up to 30 incoming calls - even unanswered calls.Not
29Caller ID (continued)Deleting information from the Caller ID listThe EXAI 7980 stores up to 30 Caller ID messages. If more new calls are received,me
3Table of contentsGetting StartedRead this first... 4St
30Caller ID (continued)Deleting all Caller ID names/numbers1 Press .2 Press , while the summaryscreen is displayed.3 Press
31Caller ID (continued)Using the Caller ID listCalling a party from the Caller ID listYou can place a call from the Caller ID list.The EXAI 7980 store
32Caller ID (continued)Storing Caller ID messages in MemoryMessages shown in the Caller ID list can be stored for memory dialing.Using the incoming ca
33Caller ID (continued)Using “Caller ID with call waiting” service“Caller ID” and “Call waiting” are separate services. CIDCW (Caller ID on CallWaitin
34Using the answering machineSetting the clockThe answering machine’s clock starts when the AC adapter cord is plugged in.1 Press until you
35Using the answering machine (continued)1 Press and hold on thebase until you hear the long beep.Then, begin speaking towards themicr
36Using the answering machine (continued)1 Press to change the statusfrom on to off. The LED display indicates the change.2 When the uni
371 : 1 minute4 : 4 minutesANN : Announce onlySetting maximum recording time for incoming messagesYou can select the maximum recording time by sliding
38Using the answering machine (continued)1 The number on the display blinks toindicate that there are new messagesreceived.2 Press t
39Using the answering machine (continued)Deleting recorded messagesTo delete individual messages, press during playback, immediately aft
4Read this firstThis cordless telephone must be set up before use. Follow these steps;Step 1 (page 5)Unpack the telephone and accessories.Step 2 (page
40Using the answering machine (continued)1 Press and hold for approximately 1 second.2 After a long beep, turn to the micro-phon
41Using the answering machine (continued)1 During the conversation, press andhold on the base unitapproximately 1 second. Recor
42Selecting a PIN codeTo play your messages from a remote location, you will need to enter a two-digitPersonal Identification Number (PIN) code (00-99
1 Call your telephone number.2 While the greeting message plays, press # and your PIN code. If the answeringmachine is off, let it ring 10 times until
44Using the answering machine (continued)1 Call your telephone number.2 During the outgoing message playback, press # followed by your PIN code. 3 The
45Additional information3-way conversationThe Uniden EXAI 7980 permits 3-way conversations between the handset, base, and outside line.When speaking o
46Additional information (continued)Changing the digital security codeThe digital security code is an identification code used to connect the handset
47Additional information (continued)Mounting the base unit on a wall[Standard wall plate mounting]This phone can be mounted on any standard telephone
48Additional information (continued)[Direct wall plate mounting]If you don't have a standard wall plate, you can mount your phone directly to the
49Additional information (continued)Installing the beltclipTo attach the beltclipInsert the beltclip into the holes on eachside of the handset. Press
5Step 1Checking the package contentsMake sure you have received the following items in the package.If any of these items are missing or damaged, conta
50Additional information (continued)Note on power sourcesBattery replacement andhandlingWhen the operating time becomes short,even after a battery is
51Additional information (continued)TroubleshootingIf your phone is not performing to your expectations, please try these simple steps first.SymptomTh
52Additional information (continued)SymptomThe answering system does notwork.The answering system does notanswer calls.Messages are incomplete.After a
53At Uniden, we’ll take care of you!If you need any assistance with this product, please call our Customer Hotline at1-800-297-1023PLEASE DO NOT RETUR
54Index0 - 93-way conversation...45AAnswering machineChanging the greeting ...35Deleting recorded messages.
55EXAI 7980 6th HEN 5/22/00 18:13 Page 55
Printed in ChinaUCZZ01271BZUniden America Corporation4700 Amon Carter BoulevardFort Worth, TX 76155Covered under one or more of the following U.S. pat
6Step 2Setting up the base unitDo the following steps.• Choose the best location• Connect the base unit• Choose the dialing modeChoose the best locati
7Step 2 (continued)Connect the base unitIf you want to install the base unit on the wall, see page 47.1 Connect the telephone line cord to theTEL LINE
8Step 2 (continued)Notes• Use only the supplied AD-420 AC adapter.Do not use any other AC adapter.• Place the base unit close to the AC outlet sothat
9Step 3Preparing the battery packCharge the battery pack for 12-15 hours before connecting the phone line.1 Press and slide the battery compart-ment c
Comments to this Manuals