Uniden OCEANUS DSC Specifications

7NOTES: "POS SEND" and "ALARM CLOCK" are not displayed in Menu when GPSmodule is not connected.When the radio is in one of the fol

8InstallationCaution: The OCEANUS DSC will only operate with a nominal 12 voltnegative ground battery system.It is important to carefully determine th

9Engine Noise SuppressionInterference from the noise generated by the electrical systems ofengines is sometimes a problem with radios. The OCEANUS DS

10Installing the OCEANUS DSCAfter you have carefully considered the various factors affecting yourchoice of location, position the radio (with the bra

11POWER On/OffTurn the unit On by rotating the PWR/VOLcontrol clockwise. Adjust the volume to a comfortable level.When you turn the unit On, you will

12Turn SQUELCH fully clockwise. This raises the “Squelch Gate” so highthat only very strong signals can get through.Turn SQUELCH fully counterclockwi

13TRIPLE WATCHTriple Watch monitors Channel 16, Channel 9, and the current MarineChannel or Weather Channel.To activate Triple Watch, press and hold 1

14WEATHER CHANNELSTo select Weather Channels 0-9, pressWX/ALERT. The radio will go to the lastselected Weather Channel. Press CH ▲ or ▼to select a d

15To cancel the channel in Memory, press and hold UIC/MEM for 2seconds. The MEM icon disappears.Note: The Memory channel can be set independently in 3

16Weather AlertThe traditional weather feature receives weather broadcast (usuallywithin a 50-mile radius) then sounds an alarm of any emergency codew

This transmitter will operate on channels/frequencies that haverestricted use in the United States. The channel assignmentsinclude frequencies assign

171. Press and hold WX/ALERT for 2seconds when WX ALERT is Off. The radio turns the WX ALERT On andthe icon appears.2. If the radio receives a 1050Hz

18TRANSMITTINGThe OCEANUS DSC transmits on fifty-four marine frequencies and receives on eighty marine frequencies. Channel 70 of the USA,Internationa

19DISTRESSNote: You must set the user MMSI inorder to send a Distress call.Please see page 40 to set theMMSI.This feature will allow you to transmit

20MARINE DISTRESS PROCEDURESpeak slowly – clearly – calmly.1. Make sure your radio is On.2. Tune to Channel 16.3. Press the PTT button on the micropho

211. DIGITAL SELECTIVE CALLING (DSC)Digital Selective Calling is a process of establishing a radio call, it hasbeen chosen by the International Mariti

223. Select the individual you want to contactusing CH ▲ and ▼. Press SELECT totransmit the individual DSC signal.4.WAITING appears followed by theind

233. Press SELECT. The MMSI codeappears, and you can now call thegroup members. Press SELECT to call.When you finish calling, the radioreturns to the

241-D. POSITION REQUESTThis radio has the ability to request the position of an individual vesselthat is registered in the DIRECTORY.1. Press SELECT a

253. Press SELECT. The individual directoryappears.4. Select the name to request theindividual’s position using CH ▲ and ▼.5. Press SELECT to transmit

262. Press CH ▼ four times to select POS SEND.3. Press SELECT. The individual directoryappears.4. Press SELECT to send your positioninformation.1-E. P

Uniden OCEANUS DSC...2Included with your OCEANUS DSC ...

271-F. STANDBYThe DSC STANDBY function allows the OCEANUS DSC to answerDSC calls with the UNATTENDED message and record the calls forresponse at anoth

282. Press CH ▼ repeatedly to select CALL WAIT.3. Press SELECT. The CALL WAITdirectory appears.4. Select the options you want to viewusing CH ▲ and ▼.

295. Press SELECT.6. If a DISTRESS call is received in CallWait, the following display appears.If an INDIVIDUAL call is received in CallWait, the foll

1. Press and hold H/L/MENU for 2 secondsto enter Menu Operation.2. Press CH ▼ once to display SETUP,and press SELECT.SETUP has 9 options as follows. T

6. Select AM or PM using CH ▲ or ▼, thenpress SELECT.7. A confirmation screen appears.312-A-2. ALARM ONThis feature allows you to turn the alarm ON.1.

322-A-3. ALARM OFFThis feature allows you to turn the alarm OFF.1. Press SELECT at SETUP (To enterSETUP, see page 30).2.ALARM CLOCK appears.3. Press S

332-B. DIRECTORYThis function will allow you to send an individual call, etc. The Directoryfunction memorizes the name and MMSI number of 20 other ve

342-B-1. NEWThis function will allow you to enter new information into thedirectory.1. Press SELECT at NEW. The registeringscreen appears.2. You can n

351. Press SELECT at the individual youwant to edit.2.EDIT appears, then press SELECT.3. You can now edit the person’s name.Press CH ▲ repeatedly, and

362-B-3. DELETEIf you want to delete the directory1. Press SELECT at the individual youwant to delete.2. Press CH ▼ once. DELETE appears,then press SE

Setup ...30Alarm Clock...

372-C. FIPSThe 6-digit Federal Information Processing System (FIPS) codeestablished by the National Weather Service (NWS) identifiesgeographic areas i

381. Press SELECT at the code that youwant to edit.2.EDIT appears, then press SELECT.3. You can now edit the FIPS code. PressCH ▲ increase the number,

394. When you finished editing the last digit,the confirmation screen appears.2-C-3. DELETEIf you want to delete a directory entry1. Press SELECT at t

402-D. AUTO CHANNEL SWITCH This feature is to allow you to disable the automatic channel change thathappens when receiving a DSC call. This feature i

412-E. POSITION REPLYWhen the calling radio has requested the position information of yourradio, you can decide to transmit an acknowledgment automati

42Example: OnWhen the radio receives a positionrequest, the following screen appears.Example: OFWhen the radio receives a positionrequest, the followi

432-F. CH TAGThis feature allows you to name each marine channel.1. Press SELECT at SETUP (To enterSETUP, see page 30).2. Display CH TAG using CH ▲and

443. Press and hold SELECT when you enterthe last digit.1. Press SELECT at the individual channelyou want to edit.2. You can edit the name. Press CH ▲

452-G. WHAM (Wireless Handheld Access Microphone)This feature, from the setup menu, will allow you to connect the WHAM.Note: When you use the WHAM in

461. Press SELECT at BASE ID, thefollowing screen appears.2. Press CH ▲ to increase the number, CH▼ to decrease. The number will beentered when SELECT

2The Uniden OCEANUS DSC VHF marine radio has been designed togive you a rugged, reliable instrument that will provide you with years oftrouble-free se

471. Press CH ▼ once at BASE ID. LINK CH appears.2. Press SELECT to enter the editingmode.3. Press CH ▲ to increase the number, CH▼ to decrease. The n

482-H. GROUP MMSI1. Press SELECT at SETUP (To enterSETUP, see page 30).2. Display GROUP MMSI using CH ▲and ▼.3. Press SELECT. The group MMSI IDscreen

492-I. USER MMSIFederal MMSI's are issued by the National Telecommunications andInformation Administration. Non-Federal MMSI's are issued b

504. You can now enter the USER MMSIcode. Press CH ▲ to increase thenumber, CH ▼ to decrease. The numberwill be entered when SELECT ispressed, and the

513. SYSTEM1. Press and hold H/L/MENU for 2 secondsto enter Menu Operation.2. Press CH ▼ twice to display SYSTEM,and press SELECT.SYSTEM has 3 options

523-B. LAMP ADJUST1. Press SELECT at SYSTEM.2. Press CH ▼ once to select LAMPADJUST.3. Press SELECT to enter the settingmode.4. Press CH ▲ and ▼ to se

533-C. KEY BEEP1. Press SELECT at SYSTEM.2. Press CH ▼ twice to select KEY BEEP.3. Press SELECT to enter the settingmode.4. Press CH ▲ and ▼ to select

54• Flush mounting bracket for “in dash” installation.(White = FMB322W, Black = FMB322B)Contact your Uniden Dealer for information.Optional Accessorie

55VHF FM Marine Radio TelephoneChannel and Functions(USA Channels)CHANNEL FREQUENCY (MHz) TYPE OF SHIP SHIP CHDESIG TRANSMIT RECEIVE TRAFFIC TO SHI

56VHF FM Marine Radio TelephoneChannel and Functions(International Channels)CHANNEL FREQUENCY (MHz) TYPE OF SHIP SHIP CHDESIG TRANSMIT RECEIVE TRAF

3Included with your OCEANUS DSCOCEANUS DSCOwner s ManualOCEANUS DSC Radio Microphone Hangerand ScrewsMounting Bracketand KnobsDC CordSpare Fuse250V 6A

57VHF FM Marine Radio TelephoneChannel and Functions(Canadian Channels)CHANNEL FREQUENCY (MHz) TYPE OF SHIP SHIP CHDESIG TRANSMIT RECEIVE TRAFFIC T

58NWR-SAME EVENT CODEEvent Code Standard EVENT LEVEL (Siren Type) LCD DisplayWarning Watch Statement TestEmergency Action Notification EAN 0 EMG NOTIF

59GeneralChannels : Transmit 54Receive 80 Marine/10 WeatherControls : On-Off/Volume, SquelchStatus Indicators : TX (Transmit), TRI (Triple Watch), HI

60If the OCEANUS DSC does not perform to your expectations, try thesuggestions listed below. If you cannot get satisfactory results, call theUniden T

61Your OCEANUS DSC is a precision of electronic equipment and youshould treat it accordingly. Due to the rugged design, very littlemaintenance is requ

62Note

63Note

64WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”)ELEMENTS OF WARRANTY: Uniden warrants, for three years, to the originalretail owner, this Uniden Pro

4Front panel/Microphone1. PTT Switch - Press to transmit and release to receive.2.13.16/9/TRI - Press this key instantly change to Channel 16, Channel

5Rear Panel Connectors23411. DC Jack2. ACC Connector3. Remote Connector4. Antenna ConnectorTo OCEANUS DSCNote: DC13.8V and GND are for GPS ANT.ACC Con

61. TX (Transmit) - Indicates transmitting.2.HI (High) - Indicates transmit output is 25 Watts.3.C - Indicates Canada Channel Mode.4.DSC - Indicators