Uniden UDW-10003 User Manual

UDW-10003 Video Surveillance System User’s ManualWhat’s in the Box Portable receiver with 3-inch color LCD display Portable video camera Camera stand

10Using the MenuItem Use it to Audio VolAdjust the volume of the audio from the camera. Choose a value from 0 (off) through 20 (maximum).Scan TimeSet

11Using Zoom ModeThe receiver can zoom in so you can see the video better. In zoom mode, the receiver increases the pixel size and focuses on the cent

12Connecting to Your TVYou can connect the receiver to any standard television with RCA composite video inputs. To use bandwidth efficiently, the syst

13Multiple Camera FeaturesYour receiver supports a total of four active cameras at a time. You can mix and match any of the accessory cameras. (See ou

14Changing to a Dierent CameraOn the receiver, press to cycle through the enabled channels from CAM1 through CAM4. After the last enabled channel,

15Setting Up a ScanYou can have the receiver automatically cycle through the enabled channels. Open the menu, and scroll down to select Scan time.Use

16Using Quad DisplayIn quad display, the receiver puts all four channels on the screen at the same time. The channels appear in the positions shown t

17Solving ProblemsIf you have any trouble with your system, try these simple steps first. If you still have a question, call our Customer Care Line li

18If… Try..None of the buttons on the receiver respond when I press them.Resetting the receiver.-Unstable or Weak SignalIf the video seems to lag and

19Signal Level Icon Data Rate (kbps)Frames per second (approx)QVGA (Zoom) VGA (Normal)Perfect 1062~1280 15~20 5~10Good 725~1062 12~16 3~5Fair 543~725

Important Safety Instructions!This manual contains important information about this product’s operation. If you are installing this product for others

20If the static is only on 1 camera If the static is on all camerasCheck near the camera for one of the common interference sources.Try moving the cam

21Additional InformationProduct SpecicationsRadio Frequency TransceiverRF Frequency 2402 Mhz ~ 2483.5 MhzModulation GFSKSpread spectrum Frequency Hop

22System Specifications Camera ReceiverLow light solution 11 IR LEDs, 1 Low light sensorLow light sensitivity 1-8 luxPicture sensor OV7725 1/4’ Color

23FCC Compliance InformationPart 15 Compliance StatementThis device complies with Part 15 of the FCC Rules. Operation is subjected to the following tw

One-year Limited WarrantyImportant: Evidence of original purchase is required for warranty service.WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”) EL

ContentsImportant Safety Instructions! ...2Warnings to Parents and Other Users ... 2For best re

4Getting StartedConnect the PowerConnect one AC adapter to the camera’s power input and the other to the receiver’s power input. (The two adapters are

5Check the Video SignalAs soon as the receiver powers on, it detects the camera and shows the video on the display. The icons at the top of the screen

6Learning Your SystemGet to Know the CameraWhat the buttons doButton What it does POWER Turn the camera on. Press and hold to turn it off.LINK Enter

7Using the camera mountThe camera has a built-in stand so you can place it on any flat surface. If you want to place your camera on a wall or a ceilin

8Get to Know the ReceiverWhat the buttons doButton What it does MENU/OKOpen and close the menu-LEFTIn zoom mode: pan to the left side of the zoom are

9Button What it does DOWNIn zoom mode: pan to the bottom of the zoom area.In the menu: move the cursor down one line.In quad display: go to channel 2