Uniden EXAI3248 Specifications download pdf (Page 14)

GETTING STARTED[ 12 ] www.uniden.com

6) Plug the telephone line cord into the telephone outlet.

7) Raise the antenna to a vertical position.

8) Align the mounting slots on the base with the

mounting posts on the wall. Then push in and down

until the phone is firmly seated.

Direct wall mounting

If you don't have a standard wall plate, you can mount your phone

directly to the wall. Before doing this, consider the following:

• Avoid electrical cables, pipes, or other items behind the

mounting location that could cause a hazard when inserting

screws into the wall.

• Try to mount your phone within 5 feet of a working phone jack to

avoid excessive cord lengths.

• Make sure the wall material is capable of supporting the weight

of the base and handset.

• Use #10 screws (minimum length of 1-3/8 inches) with anchoring

devices suitable for the wall material where the base unit will be

placed.

1) Insert two mounting screws into the wall, (with their appropriate anchoring

device), 3-15/16 inches apart.

Allow about 1/8 of an inch between the wall and screw heads for mounting the

phone.

2) Refer to steps 1 through 8 on pages 11-12 to mount the telephone.

EXAI3248_UP004BH UP01004BA_0.Qx 3/14/3 1:34 PM Page 12

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 67 68

No comments

Uniden EXAI3248 Specifications Page 14