Uniden EXAI5580 Specifications download pdf (Page 11)

INSTALLING THE

PHONE

INSTALLING THE PHONE [ 11 ]www.uniden.com

Direct wall mounting

If you don't have a standard wall plate, you can mount your phone

directly to the wall. Before doing this, consider the following:

• Avoid electrical cables, pipes, or other items behind the

mounting location that could cause a hazard when inserting

screws into the wall.

• Try to mount your phone within 5 feet of a working phone jack

to avoid excessive lengths.

• Make sure the wall material is capable of supporting the weight

of the base and handset.

• Use #10 screws (minimum length of 1-3/8 inches) with anchoring

devices suitable for the wall material where the base unit will be

placed.

1) Insert two mounting screws into the wall (with their appropriate anchoring

device), 3-15/16 inches apart.

Allow about 1/8 of an inch between the wall and screw heads for mounting the

phone.

2) Refer to steps 1 through 6 on page 10 to mount the telephone.

Installing the Beltclip

To attach the beltclip

Insert the beltclip into the holes on each side of the handset. Press down until it clicks.

To remove the beltclip

Pull both sides of the beltclip to release the tabs from the holes.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 63 64

No comments

Uniden EXAI5580 Specifications Page 11