Uniden EXAI5580 Specifications download pdf (Page 54)

TROUBLESHOOTING[ 54 ] www.uniden.com

Case

If the handset or base is exposed to

moisture or liquid, but only affects the

exterior plastic housing.

If moisture or liquid has entered the

plastic housing (i.e. liquid can be

heard in the phone or liquid has

entered the handset battery

compartment or vent openings on the

base).

Action

Wipe off the liquid, and use as normal.

Handset:

1. Remove the battery cover and leave it off for ventilation.

2. Remove the battery pack by disconnecting.

3. Leave the battery cover off and the battery pack disconnected for at least 3 days.

4. Once the phone is completely dry, reconnect the battery pack and the battery cover.

5. Recharge the handset’s battery pack for 20 hours in the base unit before using again.

Base:

1. Disconnect the AC adapter from the base unit, cutting off electrical power.

2. Disconnect the telephone cord from the base unit.

3. Let dry for at least 3 days.

IMPORTANT: You must unplug the telephone line while recharging the battery pack to

avoid charge interruption.

CAUTION:

DO NOT use a microwave oven to speed up the drying process. This will cause permanent

damage to the handset, base and the microwave oven.

After following these steps, if your cordless telephone does not work, please call our

Customer Service Hotline at 1-800-297-1023.

Liquid Damage

Moisture and liquid can damage your cordless phone. In case of accidental submersion, please read the

following steps.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 63 64

No comments

Uniden EXAI5580 Specifications Page 54