Uniden WXI377 Owner's Manual download pdf (Page 11)

GETTING STARTED [ 11 ]www.uniden.com

GETTING STARTED

• Even when the

battery pack is not

being used, it will

gradually discharge

over a long period

of time. For optimum

performance, be sure

to return the handset

to the base unit after

a telephone call.

• Talk Mode -

The handset is off the

base and talk/flash

has been pressed

enabling a dial tone.

• Standby Mode -

The handset is not in

use, off the base and

talk/flash has not

been pressed. A dial

tone is not present.

The last number dialed in the redial memory, as well as, the names and the numbers

stored in the memory locations are retained for up to 30 minutes while you replace the

battery pack.

Low battery alert

When the battery pack is very low and needs to be charged,

the phone is programmed to eliminate functions in order

to save power. If the phone is not in use, “

Low Battery”

appears on the LCD and none of the keys will operate.

If the phone is in use, “

Low Battery” flashes and the

handset beeps. Complete your conversation as quickly as

possible and return the handset to the base unit for charging.

Battery use time (per charge)

From fully charged (15-20 hours charge time)

• Up to seven hours continuous use during talk mode

• Up to fourteen days when the handset is in the standby mode

If the rubber seal appears warn, nicked, or dried out,

replacement seals are available through the Uniden Parts

Department. If you have questions regarding installation of

battery pack and/or rubber seal, please call our Customer

Hotline at 1-800-297-1023.

UC393BH (WXI377) OM 5/2/03 4:18 PM Page 11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 47 48

Comments to this Manuals

No comments

Uniden WXI377 Owner's Manual Page 11

Comments to this Manuals

Related products and manuals for Telephones Uniden WXI377