Uniden uh012sx User Manual download pdf (Page 23)

(10)

VOX

VOX is the automatic transmitting function by inputting voice into

the VOX headset mic without pressing the PTT button.

1. Press key momentarily twice while in

standby mode to enter VOX Sensitivity mode.

select/

The

current selected VOX setting will flash on the display.

2. Press or key to adjust the VOX sensitivity. 1 is

the highest sensitivity and 4 is the lowest sensitivity.

VOX can be turned off by selecting icon.

3. Press key five times to confirm the

setting and exit to standby mode.

The icon is shown on the display when VOX is selected to on and VOX

Headset is plugged into VOX Headset Jack.

The icon blinks when the voice level is possible to transmit at the

current selected VOX sensitivity level.

‘oF’

‘VOX’

‘TX’

select/

TRANSMITTING A CALL TONE

Your UH047SX radio is equipped with 5 selectable call tones that will be

transmitted when the key is pressed momentarily.

1. Press key momentarily three times while

in standby mode to enter Call Tone mode. The

current call tone number (C1-C5) will be indicated.

2. Press the or key to select desired call tone.

Each tone will be heard through the speaker.

3. Press key four times to confirm and exit to standby mode.

To transmit the selected call tone, press the key.

The selected tone will automatically be transmitted for a fixed length

of time. Call Tone will be cancelled when the button is pressed.

/call

select/

/call

Current regulations require calling tones to be restricted to one

transmission per minute. If a second transmission is

attempted within one minute then an error tone will sound.

To select a call tone:

PTT

1 2 ... 18 19 20 21 22 23 24 25 26 27 28

No comments

Uniden uh012sx User Manual Page 23