Uniden UBC3300XLT User Manual download pdf (Page 14)

ARC250 User Manual 1.10 - 14

In the top frame the channel range is selected. DEFAULT will set the start and

end channel of the selected bank. ALL CHANNELS will set all 1000 channels.

In the ‘Fill Range With’ frame you select the data you want to program in that

range. If you want to set the mode for all selected channels to WFM select the

MODE check box then select WFM and select APPLY, this will program WFM in

all selected channels. You can select more the one check box.

If the Frequency check box is selected you can set a start frequency and a

step. The software will automatically calculate the frequencies for the selected

channel range.

Example: Frequency is set to 88.000 MHz, step is set to 50 kHz and channel

range is 1-100. If you select APPLY the software will program 88.000 in

channel 1, 88.050 in channel 2, 88.100 in channel 3 etc.

Fill series: for the TAG option you can also set the fill series option. Fill series

will search for a number in the tag and use that number to ‘calculate’ the tags

in the selected channel range.

Example: in the tag box the tag is set to ‘Police 1’. The channel range is set to

1-100.

If fill series is selected, the software will automatically program ‘Police 1’ in

channel 1, ‘Police 2’ in channel 2, ‘Police 3’ in channel 3 etc. See also section

2.9.

The number of characters of the tag box is shown in blue.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 59 60

No comments

Uniden UBC3300XLT User Manual Page 14