Uniden DCX750 - DCX 750 Cordless Extension Handset Owner's Manual download pdf (Page 42)

1. Connect the AC adaptor to the charger’s DC IN 5.4V jack.

2. Plug the other end of the adaptor into a standard 240V AC power outlet.

3. Place the Pendant on the cradle with the HELP button facing forward while

charging.

GETTING STARTED

Charging Your Pendant

The battery for the Pendant is pre-installed.

# Charge the Pendant

completely (about 3 hours)

before using.

Before using the SSE P1 Pendant, it must first be charged, then registered to a

compatible base. Finally, to get the most out of the SSE P1 Pendant’s features,

it is strongly recommended that emergency contact numbers are stored in the

phonebook of the compatible base.

Status LED Indication What it means

Blue Charged

Red Charging

Blinking Red Battery is low

Blinking Blue Successfully registered

Blinking Blue rapidly During a call

Blink Blue and Red During the registration process

# Throughout the remainder of this manual the SSE P1 Pendant will be

referred to as the Pendant.

# Do not charge the

Pendant when the ambient

temperature is below 0°

C (32°F) or above 40°C

(104°F).

# The LED lights only when the Pendant is being used. The Pendant

automatically powers off after 2 minutes of inactivity.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 55 56

No comments

Uniden DCX750 - DCX 750 Cordless Extension Handset Owner's Manual Page 42