Uniden UBC220XLT User Manual download pdf (Page 13)

Installing the Belt Clip

1. Place the Belt Clip on

the mounting area on

the back of the

scanner, making sure

the holes in the clip

line up with the

threads in the back of

the scanner.

2. Insert the 2 screws into the corresponding holes and

tighten.

CAUTION: Do not tighten the screws too tight. You could

damage the case or clip.

Using the Earphone

The PHONE jack at the top of the UBC 220XLT is a standard

3,5mm stereo phone jack. You can use either the supplied

earphone, or a stereo headset of the proper impedance (32ii).

The output of this jack is monaural audio , but you will hear it

in both headphones of a stereo headset.

IMPORTANT!

Be sure to use only the supplied earphone, or stereo headset

of the proper impedance (32ii), Use of an incorrect earphone

or stereo headset may be potentially hazardous to your

hearing.

WARNlNGiTo avoid discomfort or possible hear

ing damage, be sure to set the Volume Control

before plugging in the earphone or proper head

phones, A sudden opening of the Squelch may

cause unexpected loud audio.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 29 30

Hervé d'ÉTAT 10 Aug 2025 | 16:53:00

Bien

Uniden UBC220XLT User Manual Page 13