Uniden DXI4286-2 Specifications download pdf (Page 13)

www.uniden.com

Whichever handset you choose to charge in the main base will automatically register to the

main base.

The second handset (charging in the extra charging cradle) MUST also be registered to the

main base before use. Follow the steps below to register the second handset.

1) Be sure both handsets are fully charged.

2) Remove the handset from the charging cradle, and place it in the main base. The charge/

in use LED light on the main base will begin to flash, indicating that the registration is

taking place.

3) Wait for at least 5 seconds, then remove the handset from the main base.

4) Press the find hs key on the main base. If both handset beep, registration is complete. If

one handset does not beep, re-register that handset.

5) Once both handsets are registered, it doesn’t matter which handset is placed in the main

base or the charger.

•When you charge the

handsets, Caller ID

summary screen and

the name of the

handset,

HS1

appears.

HS2

appears, you

are charging the

handset No. 2.

•The charging cradle

can be used to charge

either handset.

note

TO THE MAIN BASE

BEFORE USING!

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 47 48

No comments

Uniden DXI4286-2 Specifications Page 13