Uniden DXI4286-2 Specifications download pdf (Page 17)

BASIC SETUP [16]

www.uniden.com

4) Use the number keys (0 - 9) to enter the 3-digit area code. If you

make an error, use the delete/transfer key to backspace.

5) Press the select/channel key. A confirmation tone sounds.

6) Press the end key to complete the setting. The handset returns to standby mode.

Choosing the Dialing Mode

Your phone can communicate with the telephone network in two different ways: tone dialing

and pulse dialing. These days, most phone networks use a method called tone dialing, so

your phone comes programmed for tone dialing.

If your phone company uses pulse dialing, you'll need to change your phone's dial mode.

There's an easy way to tell: try making a call. If your call connects, your phone's setting is

fine. If not, follow the steps below:

1) When the phone is in standby mode, press and hold the call id/

menu key. The following screen appears.

2) Press the /vol/ key three times to select

Dial

3) Press the select/channel key to set the phone to pulse dialing.

4) Press the end key and return the handset to main base to

complete the setting. The handset returns to standby mode.

If your phone system

requires pulse dialing

and you need to send

DTMF tones during a

call, you can

temporarily switch over

to tone dialing. (Refer

to “Tone Dialing Switch-

over” on page 20.)

note

BASIC SETUP

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 47 48

No comments

Uniden DXI4286-2 Specifications Page 17