Uniden TRU246 Owner's Manual download pdf (Page 11)

GETTING STARTED [ 9 ]

GETTING STARTED

MOUNTING THE BASE UNIT ON A WALL

Standard wall plate mounting

This phone can be mounted on any standard telephone wall plate.

1 Snap the wall mount adapter into the notches on the base.

2 Plug the telephone line cord to the

TEL LINE jack and the AC

adapter to the

DC IN 9V jack.

3 Plug the telephone line cord into the telephone outlet.

4 Wrap the AC adapter cord inside the molded wiring channel.

Then wrap the cord around the strain relief notch.

5 Plug the AC adapter into a standard 120V AC wall outlet.

6 Raise the antenna to a vertical position.

7 Align the mounting slots on the base with the mounting posts

on the wall. Push in and down until the phone is firmly seated.

8 On the base unit, pull the handset retainer out of the slot.

Rotate it clockwise 180 degrees.

9 Flip the retainer from front to back. Slide it back into the slot

so that the lip of the retainer is up and the oval is down. The

retainer holds the handset in place.

2 - 7

8, 9

If you have wall

mounted the base,

you cannot place

the handset with

the keypad facing

inside.

(See page 38.)

TRU246_2.4GHz Owners Manual 7/26/00 9:33 Page 9

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 47 48

No comments

Uniden TRU246 Owner's Manual Page 11