Uniden TRU246 Owner's Manual download pdf (Page 12)

[ 10 ] GETTING STARTED

Direct wall plate mounting

If you don’t have a standard wall plate, you can mount your phone

directly to the wall. Before doing this, consider the following:

• Avoid electrical cables, pipes, or other items behind the mounting

location that could cause a hazard when inserting screws into

the wall.

• Try to mount your phone within 10 - 15 feet of a working phone

jack to avoid excessive cord lengths.

• Make sure the wall material is capable of supporting the weight of

the base and handset.

•Use #10 screws (minimum length of 1-3/8 inches) with anchoring

devices suitable for the wall material where the base unit will be

placed.

1 Insert two mounting screws into the wall, (with their appropriate

anchoring device), 3-15/16 inches apart. Allow about 3/16 of an inch

between the wall and screwheads for mounting the phone.

2 Refer to steps 1 through 9 on page 9 to mount the telephone.

TRU246_2.4GHz Owners Manual 7/26/00 9:33 Page 10

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 47 48

No comments

Uniden TRU246 Owner's Manual Page 12