Uniden XDECT R055 Owner's Manual download pdf (Page 7)

Picking the best spot

The best spot for the repeater/

charger is as far from the

base as possible while still

maintaining a good signal,

or near the edge of the

base’s coverage area. To

find the edge of the

coverage area:

Stand near the base 1.

and make a call on the

handset.

While on the call, carry 2.

the handset away

from the base towards the general area where you want to put the

charger.

Watch the signal strength icon on the handset. Make a note where 3.

the icon drops from 4 bars to 3 bars.

Continue walking away from the base. Make a note where the signal 4.

strength icon drops from 3 bars to 2 or if you start to hear noise on

the line (which indicates the signal is getting weaker).

Place the charger anywhere inside the range where the signal 5.

strength icon showed 3 bars and the handset had a clear signal with

no noise.

Testing the location

Connect the charger's AC adapter and make sure the

LINK

light

comes on steadily. If the light flashes, the repeater/charger is not

getting a good signal from the base. The charger may be too far

away from the base, there may be interference from electronic

devices, or the signal might be blocked by thick walls or metal

objects. Try moving the charger to another location.

XDECT R005 OM.indd 7 22/9/11 11:37:35 AM

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Uniden XDECT R055 Owner's Manual Page 7