Uniden UWS1117 Owner's Manual download pdf (Page 20)

Setting Up a Scan

You can have the receiver automatically cycle through the enabled channels.

Open the menu, and scroll down to select 1.

Scan time

Use 2.

RIGHT

LEFT

to select the amount of time you want the receiver to stay on each camera.

Choose

5 seconds

10 seconds

15 seconds

, or

20 seconds

. To turn off the scan and stay on the

current channel, select

Off

. To set the receiver into quad display, select

Quad

(see Using Quad

Display on page 21).

Double-check the channel settings (3.

CAM1

through

CAM4

) to make sure the correct channels

are enabled.

The receiver stays on each camera channel for the selected number of seconds, then switches to

►

the next active channel.

The receiver starts the scan at the currently selected channel, then scans the remaining channels

►

in order.

The receiver will only scan channels that are enabled in the menu.

►

The receiver does not go into quad display during a scan. ►

If you press ► to manually switch channels, the receiver turns off the scan. Follow the

procedure above to turn it back on.

If... Try...

The display says

No Signal

when the receiver switches to a

particular channel.

Making sure there is a camera assigned the channel. ‑

Making sure the camera is in range of the receiver. ‑

Troubleshoot the camera assigned to that channel. ‑

The receiver won’t switch to a

particular channel.

Making sure the channel is enabled (set to ‑

in the

menu).

The receiver won’t scan

channels.

Making sure ‑

Scan Time

is not set to

Off

Quad

Making sure more than one channel is enabled. ‑

I can’t switch channels manually.

Making sure more than one channel is enabled. ‑

Making sure you are not in quad display. ‑

UWS1117 OM.indd 20 28/9/11 10:21:24 AM

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments

Uniden UWS1117 Owner's Manual Page 20

Comments to this Manuals

Related products and manuals for Camera accessories Uniden UWS1117