Uniden UH-090 Owner's Manual download pdf (Page 34)

• WHAM - Lets you select and work with WHAM options. See “Using the WHAM and WHAM

x 4 Sub Menus” on Page 41.

•

SCRAMBLE - Lets you select and work with scrambler options. See “Using the Hailer

Rename Option” on Page 43.

•

WHAM PAGE - Lets you select and work with WHAM page options. See “Using the WHAM

Page Sub Menu” on Page 43.

Using the Initialize Sub Menu

The radio's initialize menu lets you set up the radio’s options and parameters. To set these

parameters, press and release PUSH/SELECT then rotate the knob to SETUP and push to

select it. Rotate the knob to

INITIALIZE, then press PUSH/SELECT to select it.

Setting Up a User MMSI

When you first turn on the radio or select this option, you must program a user MMSI. A user

MMSI is 9 digits in length.

Important: If you have already set the user MMSI, DO NOT CHANGE IT unless you have

received a new user MMSI. After you program a user MMSI for the first time, you can only

change it once more. If you try to change the user MMSI a third time, the radio will not

accept the change. To change the user MMSI again, you must return the radio to Uniden for

reprogramming.

3. Quickly press and release PUSH/SELECT. A screen appears containing options you can

select to work with the radio's features.

4. Rotate PUSH/SELECT to select

SETUP, then press

PUSH/SELECT to select it.

5. Press PUSH/SELECT to select

INITIALIZE.

6. Rotate PUSH/SELECT to select

USER MMSI, then press PUSH/SELECT to select it.

7. If a user MMSI has already been programmed once or twice, it appears on the screen. Stop

here.

8. Otherwise, if a user MMSI has not been programmed, the first digit of the blank user MMSI

is reversed in black and white..

9. To enter the first digit of the user MMSI, rotate PUSH/SELECT until the digit appears, then

press PUSH/SELECT. The digit you entered appears on the display and the reversed black

and white cursor moves to the next position.

10. Repeat Step 9 for each of the user MMSI's digits.

11. If the displayed user MMSI is correct, rotate PUSH/SELECT to select

YES, then press

PUSH/SELECT to confirm it. The setup menu appears.

12. Otherwise, If the displayed user MMSI is not correct, rotate PUSH/SELECT to select

NO,

then press PUSH/SELECT to confirm it. Then repeat Steps 6 through 11 to enter the correct

user MMSI.

Using the Setup Screen

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 59 60

Comments to this Manuals

No comments

Uniden UH-090 Owner's Manual Page 34

Comments to this Manuals

Related products and manuals for Radios Uniden UH-090