If you wish to... Then...
Select an input source other ♦ Press the ➛ or❿ buttons, until the PR selection flashes.
than the tuner (AV1, AV2 or AUX ) ♦ Press I.SELECT button one or more times to change the input
source selection.
Result : The programme number is replaced by :
• A1, A2 or AU for a satellite tuner or external
video input (used by another VTR for example)
Note : The input source must be selected before changing
any other value.
Record a programme every day ♦ Press the ➛ or❿ buttons, until the DAY selection flashes.
(Monday to Sunday) at the same time ♦ Press the $ or ❷ buttons, until the DLY (Daily) value is
displayed.
Record a programme every week ♦ Press the ➛ or ❿ buttons, until the DAY selection flashes.
on the same day and at the same time ♦ Press the $ or ❷ buttons, until the W- (Week) value is
displayed. followed by the required day.
Example : W - SA (Weekly Saturday)
Extend the recording time ♦ Press the ➛ or❿ buttons, until the STOP selection flashes.
♦ Press the $ or ❷ buttons to increase or decrease the stop
time.
Select the recording speed ♦ Press the ➛ or❿ buttons, recording speed selection flashes.
♦ Press the $ or ❷ buttons until the correct indication is
displayed :
• AUTO (Auto Tape Speed Select) : see page 37
• SP (Standard Play)
• LP (Long Play)
Select VPS/PDC ♦ Press the ➛ or❿ buttons, until the V/P selection flashes.
♦ Press the $ or ❷ buttons until the ON or “-” indication
is displayed.
Note : Do not select VPS/PDC unless you are sure the
programme you wish to record is broadcast with
VPS/PDC ON (by selecting “ON” in the right -
hand column on the screen), then you must set up
the start time EXACTLY according to the published
TV schedule. Otherwise the timer recording won’t
take place.
RECORDING
RECORDING
Insert the cassette. Press the PROG button.
Press the $ or ❷ button to select the STANDARD option and
then press the ❿ button or,
Press Menu on the remote control.
Result : The programming menu is displayed.
Press the OK button to select TIMER PROGRAMMING option.
Result : The TIMER PROGRAMMING menu is displayed.
Press ❿ to select the input source.
Select the required station by
pressing the $ or ❷ button or
I.SELECT to select the AV1,
AV2
or AUX
input sources.
Press ❿ to select the recording day.
Select the required day by pressing
the $ or ❷ button.
Press ❿ to select the recording start time.
Select the required hour value by pressing the $ or ❷ button.
Press ❿ to select the minutes.
Select the required minute value by pressing the $ or ❷ button.
Press ❿ to select the recording end time.
Select the required recording end time by pressing the $ or ❷
button, following the same procedure as when selecting the
recording start time.
Press ❿ to select the recording speed (AUTO/SP/LP).
Press the $ or ❷ button to switch between the AUTO, SP
(standard Play), LP (Long Play) recording speeds.
Press ❿ to select the VPS or PDC (V/P) recording mode.
Press the $ or ❷ button to toggle between the VPS or PDC mode
(marked ON ) and the non-VPS/PDC mode (marked -).
To set another timer programme, press ❿ button to go to next
line and follow steps 2 to 15.
When you have finished, press the MENU button.
Press the two TIMER button to activate the timer.
Note : If you wish to turn the timer off any reason simply press
the two TIMER button again.
Result : Before starting recording, the VTR compares the timer
duration with the remaining time on the cassette.
Comments to this Manuals