Uniden DRX100 Owner's Manual download pdf (Page 30)

V753UK/V653UK/V643UK

V633UK/V253UK/V243UK

V233UK

GLOSSARY

Specifications and Accessories

European Service Centre

Admiralty Way

Camberley

Surrey

GU15 3DT

Telephone 01276 62222

Printed in Indonesia

AC68-01764B

SYSTEM

Format: VHS PAL standard

Recording system: Rotary, helical scan system

Heads: 4 head (V753UK/V653UK/V643UK/V633UK), 2 Head (V253UK/V243UK/V233UK)

Video signal system: CCIR; 625 lines, 50 fields, PAL colour signal, NTSC colour, 525 lines

Tape speed: SP: 23.39mm/s (PAL) SP: 33.35mm/s (NTSC)

LP: 11.69mm/s (PAL) SLP: 11.12mm/s (NTSC)

Recording time: SP: 3 hours with E180

LP: 6 hours with E180

Winding time: About 1 minute with E180 cassettes

Dimensions: 360(w) x 94(h) x 240(d)mm (V653UK/V643UK/V633UK/V253UK/V243UK/V233UK)

430(w) x 94(h) x 240(d)mm (V753UK)

Mass: 2,6 kg approx (V653UK/V643UK/V633UK/V253UK/V243UK/V233UK), 3,5 kg (V753UK)

Operating temperature: +5 to +40˚C

Operating humidity: 10%-75%

Mains power: 220 ~ 240V AC, 50Hz

Power consumption: 17W (V753UK/V653UK/V643UK/V633UK), 15W (V253UK/V243UK/V233UK)

CONNECTORS

Aerial input: 75Ω coaxial

Aerial output: 75Ω coaxial

Video input: IN/OUT SCART socket 1.0V(p-p), 75Ω

Audio input: IN/OUT SCART socket, 308mV(rms), more than 10 kΩ

Video output: IN/OUT SCART socket, 1.0 V(p-p), 75Ω

Audio output: IN/OUT SCART socket, 308 mV(rms), less than 1.0 kΩ

AUDIO OUT Phono socket, 308 mV(rms), less than 4,7 kΩ(V753UK/V653UK/V643UK/V633UK)

VIDEO

Signal-to-noise ratio: More than 43dB (SP tape speed/PAL)

AUDIO

Signal-to-noise ratio: More than 42dB (SP tape speed/PAL/normal mono)

Frequency range: 20Hz to 20kHz (Hi-Fi mode), 100 Hz to 10 kHz (Mono mode)

Dynamic range: More than 90dB (Hi-Fi mode only)

Audio Track: 1 Track (normal-mono), 2 Channels (Hi-Fi sound) : V753UK, V653UK, V643UK, V633UK

1 Track (normal-mono) : V253UK, V243UK, V233UK

TIMER

Clock: 24-hour digital indication

No of events: 6 events 1 month

TUNER

System: Frequency synthesizer

Channel coverage: PAL I VHF: A – J, 11, 13, E2 – E12 UHF: E21 – E69

CATV: X, Y, Z, S1 – S41, 1 – 53 (48MHz to 464MHz, 8MHz steps)

Stereo: NICAM-I (V753UK/V653UK/V643UK/V633UK only)

RF converter: UHF 21 – 69 (adjustable), System-I (Preset CH36)

ACCESSORIES

Aerial cable x 1 Remote Controller x 1 (batteries UM-4, AAA, IEC R03 x 2)

Design and specifications are subject to change without notice.

PROBLEM SOLVING

For your guidance,

before calling for help...

Problem and Solutions

Before contacting the after-sales service, perform the following simple checks.

If you get any problems

contact the helpline…

When the PAUSE/STILL (❙❙) button is pressed

during playback, the still picture has severe

“noise bars” streaks...

A still picture may have “noise bars”, depending on

the condition of the tape.Press the TRK (i or j)

buttons during SLOW motion to minimize this effect.

Video Head Cleaning...

If poor pictures appear on a variety of cassette, the

video heads may need cleaning. This is not a common

problem and unless it appears, the heads should not

be cleaned. When cleaning the video heads, read all

instruction provided with the head cleaning as it can

permanently damage the video heads.

If when tuning in your TV to the VTR test pattern

your TV does not find the test pattern or the

pattern when found suffers from interference, it

may be due to the VTR output channel clashing

with the normal TV transmissions in your area.

To prevent this you will need to change the VTR

output channel in the following way...

1. Remove the aerial input plug from the socket

marked (aerial symbol) on the rear of the VTR.

2. Carry out the instructions “Tuning Your television for

the VTR” (see page 14)

3. Carry out the instructions “Setting the VTR output

Channel” (see page 17), move the channel number

several channels down from the original setting

(example : from 60 to 65).

4. Replace the aerial plug into the socket marked

(aerial symbol) on the rear of the VTR.

5. Re-tune your TV to the VTR again by following

instructions “Tuning Your Television for the VTR” (page 14).

6. If the problem still exists repeat steps 1 to 5 moving several

more channels away from the original setting.

No power...

Check that the power plug is connected to a wall

outlet.

have you pressed the VTR ON/STANDBY button?

You cannot insert a video cassette...

A video cassette can only be inserted with the window

side up and the safety tab facing you.

The television programme was not recorded...

Check the VTR aerial connections.

Is the VTR tuner properly set?

Check if the safety tab is intact on the cassette.

Timer recording was unsuccessful...

Was the two TIMER buttons pressed to activate the

timer?

Re-check the recording start/stop time settings.

If there was a power failure or interruption during

timer recording, the recording will have been

cancelled.

No playback picture or the picture is distorted...

Check to see if you are using a prerecorded tape.

You cannot see normal broadcasts...

Check the TUNER/EXTERNAL setting. it should be on

TUNER.

Check the TV/VTR aerial connections.

Noise bars or streaks on playback...

Press the TRK (i or j) buttons to minimize this effect.

PROBLEM

SOLVING

1 2 ... 25 26 27 28 29 30

Comments to this Manuals

No comments

Uniden DRX100 Owner's Manual Page 30

Comments to this Manuals