Uniden EZI996 Specifications download pdf (Page 12)

GETTING STARTED

www.uniden.com

• Try to mount your phone within 5 feet of a working phone jack to avoid excessive

cord lengths.

• Make sure the wall material is capable of supporting the weight of the base

and handset.

• Use #10 screws (minimum length of 1-3/8 inches) with anchoring devices suitable

for the wall material where the base unit will be placed.

1) Insert two mounting screws into the wall, (with their appropriate

anchoring device), 3-15/16 inches apart. Allow about 1/8 of an

inch between the wall and screw heads for mounting the

phone.

2) Refer to steps 1 through 9 on page 11 to mount the telephone.

Installing the Beltclip

To attach the beltclip

Insert the beltclip into the holes on each side of the handset. Press down until it clicks.

To remove the beltclip

Pull both sides of the beltclip to release the tabs from the holes.

Headset Installation

Your phone may be used with an optional headset, the Uniden HS910.

To use this feature, insert the headset plug into the headset jack.

Your phone is ready for hands-free conversations.

(Headset may be purchased by calling the Uniden Parts Department or

visiting the web site. See note on page 35.)

TOP

3/16 in.

3-15/16 in.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 51 52

No comments

Uniden EZI996 Specifications Page 12