Uniden EZI996 Specifications download pdf (Page 39)

ADDITIONAL INFORMATION

www.uniden.com

ADDITIONAL INFORMATION

ADDITIONAL INFORMATIONTROUBLESHOOTING

Liquid Damage

Moisture and liquid can damage your cordless phone. In case of accidental submersion, please read the

following steps.

Case

If the handset or base is

exposed to moisture or liquid,

but the liquid only affects the

exterior plastic housing.

If moisture or liquid has

entered the plastic-housing

(i.e. liquid can be heard in the

phone or liquid has entered

the handset battery

compartment or vent openings

on the base).

Action

Wipe off the liquid, and use as normal.

Handset:

1. Remove the battery cover and leave it off for ventilation.

2. Remove the battery pack by disconnecting.

3. Leave the battery cover off and the battery pack disconnected for at least 3 days.

4. Once the handset is completely dry, reconnect the battery pack and the

battery cover.

5. Recharge the handset’s battery pack for 20 hours in the base unit before using

the phone.

Base:

1. Disconnect the AC adapter from the base unit, cutting off electrical power.

2. Disconnect the telephone cord from the base unit.

3. Let dry for at least 3 days.

IMPORTANT: You must unplug the telephone line while recharging the battery

pack to avoid charge interruption.

CAUTION: DO NOT use a microwave oven to speed up the drying process.

This will cause permanent damage to the handset, base and the microwave oven.

After following these steps, if your cordless telephone does not work,

please send to:

Uniden America Corporation Parts and Service Division

4700 Amon Carter Blvd. Ft. Worth, TX76155

1-800-554-3988 Monday through Friday 8 a.m. to 5 p.m. CST

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 51 52

No comments

Uniden EZI996 Specifications Page 39