Uniden UBC800XLT Owner's Manual download pdf (Page 123)

123

Reference

seems. Select a size code for a block, and then press Scan. Now listen to the

communications. If you decide you are receiving most of the replies to the

conversations with ID’s assigned to the block you just programmed, then you’ve

probably selected the right size code and can work on the next block of the map.

Finally, for most public safety systems there are some size codes which are more

common. S-3 and S-4 are probably the most common, followed by S-10, S-11, and

S-12.

Size Code Restrictions

If you select size code S-12, S-13, or S-14, there are some restrictions as to which

blocks can be used for these codes.

• S-12 can only be assigned to Blocks 0, 2, 4, or 6.

• S-13 can only be assigned to Blocks 0 and 4.

• S-14 can only be assigned to Block 0.

Since these size codes require multiple blocks, you will be prompted for the next

available block when programming a fleet map. For example, if you assign Block 0

as an S-12, you will be prompted for b2, the next block available, instead of b1.

And if you assign Block 0 as an S-14, you would not see another prompt because

it uses all available blocks.

UB356ZH.fm Page 123 Wednesday, December 19, 2007 11:28 AM

1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 143 144

No comments

Uniden UBC800XLT Owner's Manual Page 123