Uniden UBCD996T Owner's Manual download pdf (Page 88)

At this point you can scroll to CTCSS or DCS and select the subaudible frequency in

the CTCSS range or the DCS code.

— any signal opens squelch. The default setting is .

— the scanner searches for and displays any CTCSS or DCS tone that

accompanies the transmission.

— the scanner only opens squelch if the CTCSS tone you select is also

present with the signal. The scanner then prompts you to enter or scroll to the

desired tone.

— the scanner only opens squelch if the DCS tone you select is also present

with the signal. The scanner then prompts you to enter or scroll to the desired tone.

— the scanner does not stop on the channel if the tone you select is

present. The scanner prompts you to select a CTCSS or DCS tone.

The scanner does not detect or decode a P25 digital signal if the channel or

search has CTCSS/DCS search turned on.

If you set a channel to CTCSS/DCS Search and the scanner detects a tone, when

you press [E ], the first option is

Select the conventional system

Select a channel group

Select the Channel

Set Audio Type

Analog Only

Off Off

CTCSS

DCS

Set Lockout

Set found CTCSS/DCS?

Program System

Edit Group

Edit Channel

Set Modulation

Note:

[MENU]

Quick CTCSS/DCS Save

Setting Channel Modulation Method C

YES

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 147 148

No comments

Uniden UBCD996T Owner's Manual Page 88