Uniden UBCD996T Owner's Manual Page 93
- Page / 148
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
93
To lock out a frequency found while searching, press one time to temporarily
lock it out ( appears) or twice to permanently lock it out (
appears).
If all frequencies in the search range you selected are locked out,
appears and the scanner does not search the range.
If the service range you select uses channels (such as CB Radio or Marine), the
scanner displays the service channel number.
Quick Search lets you search from the currently-tuned frequency if you are scanning
a conventional system or sets the system to ID search if you are scanning a trunked
system.
If you are on a conventional system or channel, press to
start quick search. appears. Press
to go to quick search hold.
Press to start quick search or to go to the search menu.
Custom Search lets you program and search 10 custom search ranges. You can
search any of these ranges simultaneously and select each custom search range
you set. During custom search, the scanner searches starting with the lowest
frequency in the search range you select to the highest frequency in the range.
There are two methods to begin a custom search.
Search ranges are preset. These ranges can be edited. See “ Editing a Custom
Search Range” on Page94 on Page to change the range.
You cannot turn off all custom search ranges.
The other approach is:
+
Press to .
[L/O]
Notes:
+ [SCAN/SEARCH]
[HOLD/RESUME]
[E ] [.No]
Notes:
[MENU]
[SCAN/SEARCH]
Temporary Locked
Out
All Locked!
Quick Search? Yes = ”E” / No = ”.”
Search for ...
Custom Search ...
Quick Search? Yes=”E” / No=”.”
[.No] then Custom Search
L/O
!
!
!
!
Quick Search
Custom Search
YES
gQ g
Qg
Qg
g
- OWNER'S MANUAL 1
- Precautions 2
- Power Related Issues 3
- Table of Contents 4
- Introduction 11
- Feature Highlights 12
- Auto Store 15
- Priority 15
- PC Control and Cloning 15
- Memory Storage Limits 16
- Search Lockout Limits 17
- About This Manual 17
- Understanding Quick Keys 21
- What is Scanning? 22
- What is Searching? 22
- What is CTCSS/DCS? 22
- Conventional Scanning 23
- Simplex Operation 23
- Repeater Operation 24
- What is Trunk Tracking? 24
- Trunked Scanning 25
- Types of Trunking Systems 25
- EDACS Trunking 26
- LTR Trunking 27
- Startup Configuration 28
- Multi-Site Trunking 28
- I-Call (Motorola/EDACS) 29
- Where To Get More Information 29
- UBCD996T 30
- Setting Up Your Scanner 31
- MOUNTING WOOD SCREWS 32
- Recording 33
- Vehicle Installation 33
- Mounting Using ISO Technique 36
- Removing the Display Sticker 37
- Controls, Keys, and Functions 39
- A Look At The Display 44
- Operation 45
- Scanning Systems 46
- Selecting Systems to Scan 47
- Locking/Unlocking Systems 48
- Locking/Unlocking Channels 48
- ID Scan/ID Search Mode 48
- Holding On a System 49
- Holding On a Channel 49
- Trunking Activity Indicators 50
- Toggling the Display Mode 51
- Optimizing P25 Performance 52
- Using the Menu 54
- Programming General Settings 55
- Adjusting the Key Beep 56
- Setting the Audio AGC 56
- Setting the GPS Format 57
- Setting the Serial Port Speed 58
- Viewing Memory Used 59
- Wired Cloning 60
- Programming Your Scanner 62
- Programming System Settings 67
- Setting ID Scan/ID Search MEL 70
- Setting Data Skip C 70
- Setting the Status Bit M 72
- Setting End Code Operation M 72
- Setting I-Call Operation ME 72
- Setting the EDACS ID Format E 73
- Editing Sites MESL 75
- Editing Channel Groups MECL 75
- Programming Sites MESL 76
- Setting Site Modulation ML 79
- Setting Site Attenuation MESL 79
- Setting Site Lockout MESL 79
- Setting Site Hold Time MESL 80
- Adjust P25 Level MEL 82
- Deleting Sites ME 83
- Programming Channels MECL 85
- Q Select the channel 86
- Set Record MECL 90
- Setting Lockout MESL 91
- Copying a Channel MESL 91
- Deleting a Channel MESL 91
- Searching and Storing 92
- Quick Search 93
- Custom Search 93
- Editing a Custom Search Range 94
- Search With Scan 95
- Set Delay Time 96
- Set Attenuator 97
- Set Record 97
- Auto Search and Store 98
- Trunked Search and Store 99
- Using the Close Call Feature 100
- Close Call Hits 102
- Close Call Hits with Scan 102
- Search and Close Call Options 104
- Priority Scan 110
- Fire Tone-Out 114
- Location-Based (GPS) Scanning 117
- Setting the Options 120
- Deleting a Location 121
- GPS Display Mode 122
- GPS Review Location Mode 123
- Care and Maintenance 125
- Troubleshooting 126
- Specifications 129
- Reference 132
- User Defined Fleet Maps 134
- Size Code Restrictions 135
- Quick Key 141
- Printed in China 148
- UBZZ01335AA(0) 148
Related products and manuals for Car media receivers Uniden UBCD996T
(64 pages)© 2020, manymanuals.com. All rights reserved. | 0.309 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals